License Plate Bracket: Removal

If installed, remove the license plate.
Remove the four screws attaching the license plate bracket to the body. See Fig 1.
On export models remove the bolts and nuts. See Fig 2.
Separate the bracket from the body.
Disconnect the electrical connectors, if equipped.

Fig 1: LICENSE PLATE BRACKET

Courtesy of DAIMLERCHRYSLER CORP.

1 - BOLTS (4)

2 - BRACKET

Fig 2: LICENSE PLATE BRACKET - EXPORT

Courtesy of DAIMLERCHRYSLER CORP.

1 - NUTS (4)

2 - BOLTS (2)

3 - BUMPER

4 - ELECTRICAL CONNECTORS

5 - LICENSE PLATE BRACKET

6 - BOLTS (4)