Diagnostic Procedure

WARNING: This page is about a different car, the 2004 Dodge Pickup and 2004 Dodge Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Refer to VERIFICATION TESTS for appropriate verification test procedures.

Ignition on, engine not running.
With the DRBIII®, perform the SRI Memory Test.

Does the DRBIII® display Write Failure?
1. Yes --> Replace and program the Powertrain Control Module per Service Information.
  Perform POWERTRAIN VERIFICATION TEST VER - 1 .
2. No --> Go To 2
With the DRBIII®, perform the SRI Memory Test.
Does the DRBIII® display Write Refused?
1. Yes --> Go To 3
2. No --> Go To 4
With the DRBIII®, perform the SRI Memory Test a second time.
NOTE: Retest the SRI Memory two more times.

Does the DRBIII® display Write Refused again?
1. Yes --> Replace and program the Powertrain Control Module per Service Information.
  Perform POWERTRAIN VERIFICATION TEST VER - 1 .
2. No --> Test Complete.
With the DRBIII®, perform the SRI Memory Test.
Does the DRBIII® display SRI Mileage Invalid?
1. Yes --> Update the mileage and retest the SRI Memory.
  Perform POWERTRAIN VERIFICATION TEST VER - 1 .
2. No --> Go To 5
Compare the SRI Mileage stored with the Instrument Panel Odometer.
Is the mileage within the specified range displayed on the DRBIII®?
1. Yes --> Test Complete.
2. No --> Update the mileage and retest the SRI Memory.
  Perform POWERTRAIN VERIFICATION TEST VER - 1 .