LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2005 >> Wrangler X, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 627 (Powertrain Diagnostic Procedures - DRIVEABILITY - Gas - Symptom & Diagnostic Tests (DTCS P0031 To P1899)) >> DRIVEABILITY - Gas - Diagnostic Tests >> P0320-No Crank Reference Signal At Pcm (Gas - Except NGC) >> Possible Causes

Possible Causes

WARNING: This page is about a different car, the 2004 Dodge Pickup and 2004 Dodge Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. CAM POSITION SENSOR SIGNAL
  2. INTERMITTENT CRANK POSITION SIGNAL
  3. (K7) 5-VOLT SUPPLY CIRCUIT SHORTED TO VOLTAGE
  4. (K7) 5-VOLT SUPPLY CIRCUIT OPEN
  5. (K7) 5-VOLT SUPPLY CIRCUIT SHORTED TO GROUND
  6. (K24) CKP SENSOR SIGNAL CIRCUIT SHORTED TO VOLTAGE
  7. (K24) CKP SENSOR SIGNAL CIRCUIT OPEN
  8. (K24) CKP SENSOR SIGNAL CIRCUIT SHORTED TO GROUND
  9. (K24) CKP SENSOR SIGNAL SHORTED TO (K7) 5-VOLT SUPPLY CIRCUIT
  10. (K4) SENSOR GROUND CIRCUIT OPEN
  11. CRANKSHAFT POSITION SENSOR
  12. PCM
scientia non olet · About LEMON Manuals