LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2005 >> Wrangler X, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 627 (Powertrain Diagnostic Procedures - DRIVEABILITY - Gas - Symptom & Diagnostic Tests (DTCS P0031 To P1899)) >> DRIVEABILITY - Gas - Diagnostic Tests >> P0300-Multiple Cylinder Mis-Fire; P0301-Cylinder #1 Misfire; P0302-Cylinder #2 Misfire; P0303-Cylinder #3 Misfire; P0304-Cylinder #4 Misfire; P0305-Cylinder #5 Misfire; P0306-Cylinder #6 Misfire; P0307-Cylinder #7 Misfire; P0308-Cylinder #8 Misfire; P0309-Cylinder #9 Misfire; P0310-Cylinder #10 Misfire (Gas - Except NGC) >> When Monitored and Set Condition:

When Monitored and Set Condition:

WARNING: This page is about a different car, the 2004 Dodge Pickup and 2004 Dodge Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.

When Monitored: Any time the engine is running, and the adaptive numerator has been successfully updated.

Set Condition: When more than a 1% misfire rate is measured during two trips, or with a 6% to 30% misfire rate during one trip.