Hard Wired Inputs

The hard wired inputs to the EMIC include the following:

• ABS Warning Indicator Driver 
• Brake Warning Indicator Sense 
• Driver Door Ajar Switch Sense 
• Fog Lamp Feed 
• Front Axle Lock Request (w/Off-Road Package Only) 
• Front Lock Indicator Switch Sense (w/Off-Road Package Only) 
• Fused B(+) - Ignition-Off Draw 
• Fused Ignition Switch Output (Run-Start) 
• Headlamp Switch Output 
• High Beam Indicator Driver 
• Key-In Ignition Switch Sense 
• Left Turn Signal 
• Panel Lamps Dimmer Signal 
• Passenger Door Ajar Switch Sense 
• Rear Axle Lock Request (w/Off-Road Package Only) 
• Rear Lock Indicator Switch Sense (w/Off-Road Package Only) 
• Rear Window Defogger Switch Sense 
• Right Turn Signal 
• Seat Belt Switch Sense 
• 4WD Switch Sense (w/o Off-Road Package only) 

Refer to the appropriate wiring information in ELECTRICAL for additional details.