LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2005 >> Wrangler X, Automatic >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Cluster >> Instrument Cluster >> Assembly >> Trip Odometer Reset Button Boot

Trip Odometer Reset Button Boot

  1. Position the trip odometer reset button boot into the pocketed mounting hole from the back of the cluster lens. See Figure.
  2. Gently pull the tip of the trip odometer reset button boot from the face of the cluster lens until it is fully seated in the pocketed mounting hole.
  3. Reinstall the cluster lens onto the cluster housing. Refer to CLUSTER LENS .
  4. Reinstall the instrument cluster onto the instrument panel. (Refer to ELECTRICAL/INSTRUMENT CLUSTER - INSTALLATION) .
  5. Reconnect the battery negative cable.
scientia non olet · About LEMON Manuals