Diagnostic Test
WARNING: This page is about a different car, the 2005 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
- 1) INTEGRATED POWER MODULE
Turn the ignition off.
Replace the Wiper HI/LOW relay with and known good relay.
With the Scan Tool, clear all FCM DTC's.
Turn the Wipers ON then OFF.
With the Scan Tool, read the Wiper DTC's.
Does the Scan Tool read: B2317-WIPER HI/LOW CONTROL CIRCUIT LOW?
Yes
- Replace the Integrated Power Module in accordance with the service information.
- Perform BODY VERIFICATION TEST - VER 1 .
No
- Test complete.
- Perform BODY VERIFICATION TEST - VER 1 .