LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2005 >> Wrangler Rubicon, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 607 (Power Door Locks (Service Information)) >> Remote Keyless Entry Transmitter >> Standard Procedure >> Remote Keyless Entry Customer Preferences >> Horn Chirp Disabling/Enabling

Horn Chirp Disabling/Enabling

WARNING: This page is about a different car, the 2005 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.

The horn chirp can be toggled using a scan tool or by using the Remote Keyless Entry (RKE) transmitter.

To DISABLE (cancel) the horn chirp feature: With the ignition in the ON position, press and hold the transmitter LOCK button for four seconds. While pressing the LOCK button in, press the PANIC button within 6 seconds. Release both buttons when a single chime is heard.

To ENABLE the horn chirp feature, repeat the above procedure.

scientia non olet · About LEMON Manuals