Relay-Wiper High/Low: Description
The wiper high/low relay (1) is a International Standards Organization (ISO) micro relay. Relays conforming to the ISO specifications have common physical dimensions, current capacities, terminal functions and patterns (2). This relay is contained within a small, rectangular, molded plastic housing and is connected to all of the required inputs and outputs through five integral male spade-type terminals that extend from the relay base plate.
The wiper high/low relay is located in the integrated power module (IPM) in the engine compartment, near the battery. Refer to the layout label on the underside of the IPM cover for specific relay cavity assignment information. The wiper high/low relay cannot be adjusted or repaired and, if faulty or damaged, it must be replaced.