LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2005 >> Wrangler Rubicon, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 592 (Audio System & Video System (Service Information)) >> Radio Noise Suppression Components >> Installation >> Exhaust To Frame

Exhaust To Frame

WARNING: This page is about a different car, the 2005 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Battery Negative Cable
GC0028983Courtesy of DAIMLERCHRYSLER CORP.
  1. Position cable to exhaust pipe
  2. Install and tighten mounting fastener to exhaust pipe.
  3. Position cable to frame.
  4. Install and tighten mounting fastener.
  5. Connect battery negative cable.
scientia non olet · About LEMON Manuals