LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2005 >> Wrangler Rubicon, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 586 (Horn System (Service Information)) >> Switch-Horn >> Removal

Section 586 (Horn System (Service Information)): Switch-Horn: Removal

WARNING: This page is about a different car, the 2005 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Removal Of Switch-Horn
GC0029096Courtesy of DAIMLERCHRYSLER CORP.
WARNING: ON VEHICLES EQUIPPED WITH AIRBAGS, REFER TO  RESTRAINTS - SERVICE INFORMATION  BEFORE ATTEMPTING ANY STEERING WHEEL, STEERING COLUMN, OR INSTRUMENT PANEL COMPONENT DIAGNOSIS OR SERVICE. FAILURE TO TAKE THE PROPER PRECAUTIONS COULD RESULT IN ACCIDENTAL AIRBAG DEPLOYMENT AND POSSIBLE PERSONAL INJURY. 
  1. Disconnect and isolate the battery negative cable.
  2. Remove the trim cover from the driver side airbag. (Refer to ELECTRICAL/RESTRAINTS/DRIVER AIRBAG - REMOVAL) .
  3. Remove the horn switch (2) and tray (6) as a unit from the pouch on the retaining strap of the driver side airbag (5).