LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2005 >> Wrangler Rubicon, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 585 (Instrument Cluster (Service Information)) >> Instrument Cluster - Service Information >> Assembly >> Cluster Lens, Housing, And Rear Cover

Cluster Lens, Housing, And Rear Cover

WARNING: This page is about a different car, the 2005 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying EMIC Gauge Cluster Lens, Housing & Rear Cover
GC0029156Courtesy of DAIMLERCHRYSLER CORP.
  1. Position the cluster lens over the face of the instrument cluster.
  2. Press firmly and evenly on the cluster lens to install it onto the cluster housing.
  3. Position the cluster rear cover over the rear of the instrument cluster.
  4. Press firmly and evenly on the cluster back cover to install it onto the cluster housing.
  5. Reinstall the instrument cluster into the instrument panel. (Refer to ELECTRICAL/INSTRUMENT CLUSTER - INSTALLATION) .
  6. Reconnect the battery negative cable.
scientia non olet · About LEMON Manuals