LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2005 >> Wrangler Rubicon, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 581 (DTCS B1BC7 To U0019) >> Diagnosis And Testing >> B2102-Ignition Run/Start Input Circuit High >> Monitor Conditions

Monitor Conditions

WARNING: This page is about a different car, the 2005 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
  1. When Monitored: 

    While the CAN bus ignition status is RUN or SNA and the IOD status is "IN". The module checks the (F201) Fused Ignition Switch Output (Run-Start) circuit voltage input range.

scientia non olet · About LEMON Manuals