LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2005 >> Wrangler Rubicon, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 571 (Nag1 Automatic Transmission - Electrical Diagnostics) >> DTC Troubleshooting >> P2783-Torque Converter Temperature Too High >> Monitor Conditions

Monitor Conditions

WARNING: This page is about a different car, the 2005 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
  1. When Monitored: 

    When the solenoid supply voltage is active. With no reporting Input Speed Sensor 1 or 2 (N2 - N3), CAN Bus, PCM, CAN Engine, and/or CAN Engine Speed DTCs present. Torque Converter Clutch in slip mode.

scientia non olet · About LEMON Manuals