LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2005 >> Wrangler Rubicon, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 566 (Nag1 Automatic Transmission (Service Information)) >> Unit-ELECTROHYDRAULIC >> Description >> Hydraulic Control Unit >> Working Pressure (Line Pressure or Operating Pressure) (p-A)

Working Pressure (Line Pressure or Operating Pressure) (p-A)

WARNING: This page is about a different car, the 2005 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.

The working pressure provides the pressure supply to the hydraulic control and the transmission shift elements. It is the highest hydraulic pressure in the entire hydraulic system. The working pressure is regulated at the working pressure regulating valve in relation to the load and gear. All other pressures required for the transmission control are derived from the working pressure.