Clutch Application
WARNING: This page is about a different car, the 2005 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
Refer to CLUTCH APPLICATION for which shift elements are applied in each gear position.
CLUTCH APPLICATION
| GEAR | RATIO | B1 | B2 | B3 | K1 | K2 | K3 | F1 | F2 |
|---|---|---|---|---|---|---|---|---|---|
| 1 | 3.59 | X* | X | - | - | - | X* | X | X |
| 2 | 2.19 | - | X | - | X | - | X* | - | X |
| 3 | 1.41 | - | X | - | X | X | - | - | - |
| 4 | 1.00 | - | - | - | X | X | X | - | - |
| 5 | 0.83 | X | - | - | - | X | X | X* | - |
| N | X | - | - | - | - | - | X | - | - |
| R | 3.16 | X* | - | X | - | - | X | X | - |
| R (4WD Low or Limp-in) | 1.93 | - | - | X | X | - | X | - | - |
| * = The shift components required during coast. | |||||||||