LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2005 >> Wrangler Rubicon, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 563 (545RFE Automatic Transmission (Service Information)) >> Automatic Transmission - 545RFE - Service Information >> Seal-Oil Pump Front >> Installation

Seal-Oil Pump Front: Installation

WARNING: This page is about a different car, the 2005 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Install Oil Pump Front Seal
GC0005296Courtesy of DAIMLERCHRYSLER CORP.
1 - TOOL C-3860-A
  1. Clean seal bore of the oil pump of any residue or particles from the original seal.
  2. Install new oil seal in the oil pump housing using Seal Installer C-3860-A (1). See Fig 1.