Rear Floor Ducts
WARNING: This page is about a different car, the 2005 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the floor console from the passenger compartment (Refer to BODY/INTERIOR/FLOOR CONSOLE - REMOVAL) .
- Remove the front seats (Refer to BODY/SEATS/SEAT - REMOVAL) .
- Disengage the push-pin retainer (1) that secures the front console duct (2) to the gear selector (3).
- Disconnect the front console duct from the air distribution housing (4) and remove the console duct.
- Remove the screws (5) that secure the gear selector to the floor panel (6) and position the gear selector out of the way.
- Roll back the front floor carpet from under the instrument panel toward the rear of the vehicle (Refer to BODY/INTERIOR/CARPETS AND FLOOR MATS - REMOVAL) .
- Disconnect the left rear floor duct (1) and the right rear floor duct (2) from the rear floor distribution duct (3).
- Disengage the retainer that secures the rear floor ducts to the floor support and remove the floor ducts.
- Disconnect the rear floor distribution duct from the air distribution housing (4) and remove the distribution duct.