Outboard Ducts
WARNING: This page is about a different car, the 2005 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the instrument panel and place it on a workbench (Refer to BODY/INSTRUMENT PANEL/INSTRUMENT PANEL ASSEMBLY - REMOVAL) .
- Remove the instrument panel top cover (1) from the instrument panel.
- Remove the screws that secure the passenger side instrument panel duct and demister duct assembly (2) and the driver side instrument panel duct and demister duct assembly (3) to the instrument panel top cover.
- Disconnect the instrument panel ducts from the main distribution duct (4) and the end outlets (5) and remove the ducts from the instrument panel top cover.