LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2005 >> Wrangler Rubicon, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 560 (Engine Cooling System & Automatic Transmission Cooling System) >> Transmission >> Cooler-Transmission >> Installation

Section 560 (Engine Cooling System & Automatic Transmission Cooling System): Transmission: Cooler-Transmission: Installation

WARNING: This page is about a different car, the 2005 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position transmission oil/power steering cooler in vehicle.
  2. Install transmission mounting bolts. Tighten to 14 N.m (123 in. lbs.)
  3. Install transmission and power steering lines into cooler (Refer to COOLING/TRANSMISSION - STANDARD PROCEDURE).
  4. Install grill (Refer to BODY/EXTERIOR/GRILLE - INSTALLATION) .
scientia non olet · About LEMON Manuals