4.7L Engine
WARNING: This page is about a different car, the 2005 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
| 1 - ECT SENSOR |
| 2 - MOUNTING BOLTS (2) |
| 3 - MAP SENSOR |
| 4 - INTAKE MANIFOLD |
- Install sensor.
- Tighten to 11 N.m (8 ft. lbs.) torque.
- Connect electrical connector to sensor.
- Replace any lost engine coolant. (Refer to COOLING - STANDARD PROCEDURE) .