3.0L Diesel
WARNING: This page is about a different car, the 2005 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
| 1 - IDLER PULLEY |
| 2 - GENERATOR |
| 3 - IDLER PULLEY |
| 4 - A/C COMPRESSOR |
| 5 - COOLING FAN SUPPORT |
| 6 - VIBRATION DAMPER |
| 7 - BELT TENSIONER |
| 8 - POWER STEERING PUMP |
| 9 - ACCESSORY DRIVE BELT |
| 10 - VISCOUS HEATER |
- Disconnect negative battery cable.
- Remove accessory drive belt. See Fig 1(Refer to COOLING/ACCESSORY DRIVE/DRIVE BELTS - REMOVAL) .
1 - ACCESSORY BELT TENSIONER RETAINING BOLT 2 - POWER STEERING PUMP PULLEY 3 - BELT TENSIONER 4 - BRACKET 5 - POWER STEERING PUMP 6 - POWER STEERING PUMP RETAINING BOLTS 7 - POWER STEERING PUMP PULLEY RETAINING BOLTS - Remove belt tensioner retaining bolt and remove tensioner from bracket. See Fig 2.