LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2005 >> Wrangler Rubicon, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 546 (5.7L Engine (Service Information)) >> Retainer-Crank Rear Oil - Seal >> Removal

Retainer-Crank Rear Oil - Seal: Removal

WARNING: This page is about a different car, the 2005 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Rear Seal Retainer Torque Sequence
GC0003976Courtesy of DAIMLERCHRYSLER CORP.
  1. Disconnect negative cable from battery.
  2. Remove the transmission. (Refer to TRANSMISSION/TRANSAXLE/AUTOMATIC - NAG1 - REMOVAL) .
  3. Remove the flexplate. (Refer to ENGINE/ENGINE BLOCK/FLEX PLATE - REMOVAL) .
  4. Remove the oil pan. (Refer to ENGINE/LUBRICATION/OIL PAN - REMOVAL) 
  5. Remove the rear oil seal retainer mounting bolts.
  6. Carefully remove the retainer from the engine block.
scientia non olet · About LEMON Manuals