LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2005 >> Wrangler Rubicon, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 546 (5.7L Engine (Service Information)) >> Pump-Engine Oil >> Installation

Pump-Engine Oil: Installation

WARNING: This page is about a different car, the 2005 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Oil Pump R+I
GC0003966Courtesy of DAIMLERCHRYSLER CORP.
  1. Position the oil pump onto the crankshaft and install the 4 oil pump retaining bolts.
  2. Tighten the oil pump retaining bolts to 28 N.m (250 in. lbs.).
  3. Install the timing chain cover. (Refer to ENGINE/VALVE TIMING/TIMING BELT / CHAIN COVER(S) ).
  4. Install the pick-up tube and oil pan. (Refer to ENGINE/LUBRICATION/OIL PAN - INSTALLATION) .
scientia non olet · About LEMON Manuals