LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2005 >> Wrangler Rubicon, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 546 (5.7L Engine (Service Information)) >> Manifold - Exhaust >> Removal >> Exhaust Manifold

Exhaust Manifold

WARNING: This page is about a different car, the 2005 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect negative battery cable.
  2. Raise vehicle.
  3. Remove exhaust pipe to manifold bolts.
  4. Remove engine mount to frame fasteners (3,4).
  5. Using suitable jack, raise engine enough to remove manifolds.
    CAUTION: Do not damage engine harness while raising the engine.
  6. Remove the engine mount. (Refer to ENGINE/ENGINE MOUNTING/FRONT MOUNT - REMOVAL) .
    Fig 1: Exhaust Manifold Torque - Left
    GC0004014Courtesy of DAIMLERCHRYSLER CORP.
    Fig 2: Exhaust Manifold Torque - Right
    GC0004013Courtesy of DAIMLERCHRYSLER CORP.
  7. Remove heat shield.
  8. Remove manifold bolts using sequence provided.
  9. Remove manifold and gasket.
scientia non olet · About LEMON Manuals