LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2005 >> Wrangler Rubicon, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 546 (5.7L Engine (Service Information)) >> Flex Plate >> Installation

Flex Plate: Installation

WARNING: This page is about a different car, the 2005 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Flex Plate Tightening Sequence
GC0003986Courtesy of DAIMLERCHRYSLER CORP.
1 - Flexplate
  1. Position the flexplate or flywheel onto the crankshaft and install the bolts hand tight.
  2. For automatic transmissions:   Tighten the flexplate retaining bolts to 95 N.m (70 ft. lbs.).
  3. Install the transmission. (Refer to TRANSMISSION/TRANSAXLE/AUTOMATIC - NAG1 - INSTALLATION) .
scientia non olet · About LEMON Manuals