Section 546 (5.7L Engine (Service Information)): Damper-Crankshaft: Removal

WARNING: This page is about a different car, the 2005 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect negative cable from battery.
Remove accessory drive belt (Refer to COOLING/ACCESSORY DRIVE/DRIVE BELTS - REMOVAL) .
Drain cooling system (Refer to COOLING - STANDARD PROCEDURE) .
Remove radiator upper hose.
Remove fan shroud (Refer to COOLING/ENGINE/RADIATOR FAN - REMOVAL) .
Remove crankshaft damper bolt.

Fig 1: Crankshaft Damper Removal
Courtesy of DAIMLERCHRYSLER CORP.

1 - Special Tool 1023 Puller

2 - Special Tool 8513A Insert
Remove damper using Special Tools 8513A Insert and 1023 Three Jaw Puller.