LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2005 >> Wrangler Rubicon, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 545 (4.7L Engine (Service Information)) >> Mount-Engine Rear >> Installation >> 4X2

Mount-Engine Rear: Installation: 4X2

WARNING: This page is about a different car, the 2005 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Removing/Installing Engine Rear Mount (4X2)
GC0027233Courtesy of DAIMLERCHRYSLER CORP.
  1. Install the transmission mount bracket (2), if removed.
  2. Position the transmission mount (3) on the transmission mount bracket (2). Install the fasteners (1)that attach the transmission mount to the bracket.
  3. Torque the bolts to N.m ( ft.lbs.) torque.
  4. Install the crossmember.
scientia non olet · About LEMON Manuals