LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2005 >> Wrangler Rubicon, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 545 (4.7L Engine (Service Information)) >> Mount-Engine Front >> Removal

Mount-Engine Front: Removal

WARNING: This page is about a different car, the 2005 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Removing/Installing Engine Front Mount
GC0027232Courtesy of DAIMLERCHRYSLER CORP.
  1. Disconnect negative battery cable.
  2. Raise vehicle.
  3. Remove engine mount thru bolts.
  4. Raise engine using suitable jack.
  5. Remove engine mount bolts (2).
  6. Remove mount (1) from engine.