Installation - Left Side
WARNING: This page is about a different car, the 2005 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
| ITEM | DESCRIPTION | TORQUE |
| 1 | Cover Fasteners | 12 N.m (105 in. lbs.) |
CAUTION:
Do not use harsh cleaners to clean the cylinder head covers. Severe damage to covers may occur.
- Clean cylinder head cover and both sealing surfaces. Inspect and replace gasket as necessary.
- Install cylinder head cover and hand start all fasteners. Verify that all studs are in the correct location shown in.
- Tighten cylinder head cover bolts (1) and double ended studs to 12 N.m (105 in. lbs.).
- Install left side breather and connect breather tube.
- Connect injector electrical connectors and injector harness retaining clips.
- Install the resonator and air inlet hose.
- Connect negative cable to battery.