Seal-Crankshaft Oil - Front: Installation
WARNING: This page is about a different car, the 2005 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
To prevent severe damage to the Crankshaft, Damper or Special Tool 8512, thoroughly clean the damper bore and the crankshaft nose before installing Damper.
- Using Special Tool 8348 (2) and 8512 (3) , install crankshaft front seal.
- Install vibration damper (Refer to ENGINE/ENGINE BLOCK/VIBRATION DAMPER - INSTALLATION) .
- Install radiator cooling fan and shroud (Refer to COOLING/ENGINE/RADIATOR FAN - INSTALLATION) .
- Install upper radiator hose.
- Install A/C compressor and tighten fasteners to 54 N.m (40 ft. lbs.).
- Install accessory drive belt (Refer to COOLING/ACCESSORY DRIVE/DRIVE BELTS - INSTALLATION) .
- Refill cooling system (Refer to COOLING - STANDARD PROCEDURE) .
- Connect negative cable to battery.