LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2005 >> Wrangler Rubicon, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 544 (3.7L Engine (Service Information)) >> Mount-Engine Rear >> Installation >> 4X4

Mount-Engine Rear: Installation: 4X4

WARNING: This page is about a different car, the 2005 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Removal And Installation Of 4X4 Trans Mount
GC0027234Courtesy of DAIMLERCHRYSLER CORP.
  1. Position the transmission mount (1) on the transmission. Install the bolts (2) that attach the transmission mount to the transmission.
  2. Torque the bolts to N.m (ft.lbs) torque.
  3. Install the crossmember.
scientia non olet · About LEMON Manuals