LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2005 >> Wrangler Rubicon, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 544 (3.7L Engine (Service Information)) >> Damper-Crankshaft >> Removal

Section 544 (3.7L Engine (Service Information)): Damper-Crankshaft: Removal

WARNING: This page is about a different car, the 2005 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Crankshaft Damper Removal
GC0011805Courtesy of DAIMLERCHRYSLER CORP.
  1. Disconnect negative cable from battery.
  2. Remove radiator fan (Refer to COOLING/ENGINE/RADIATOR FAN - REMOVAL) .
  3. Remove accessory drive belt (Refer to COOLING/ACCESSORY DRIVE/DRIVE BELTS - REMOVAL) .
  4. Remove crankshaft damper bolt.
  5. Remove damper using Special Tools 8513 Insert (1) and 1026 Three Jaw Puller (2).
scientia non olet · About LEMON Manuals