LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2005 >> Wrangler Rubicon, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 541 (Differential & Driveline (Service Information)) >> Propeller Shaft >> Propeller Shaft-Front >> Installation

Propeller Shaft-Front: Installation

WARNING: This page is about a different car, the 2005 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Companion Flange Installation Reference Mark
GC0007713Courtesy of DAIMLERCHRYSLER CORP.
  1. Install the shaft between companion flanges.
  2. Install shaft (2) with reference marks (4) aligned on companion flanges (3).
  3. Install bolts to axle pinion flange (1) and tighten bolts to 108 N.m (80 ft. lbs.).
    Fig 2: Transfer Case Flange
    GC0028378Courtesy of DAIMLERCHRYSLER CORP.
  4. Install shaft (1) on transfer case flange (2).
  5. Install bolts to transfer case flange (2) and tighten bolts to 32 N.m (24 ft. lbs.).
  6. Install transmission crossmember.
scientia non olet · About LEMON Manuals