LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2005 >> Wrangler Rubicon, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 541 (Differential & Driveline (Service Information)) >> Front Axle - C200F >> Axle Shafts >> Installation

Axle Shafts: Installation

WARNING: This page is about a different car, the 2005 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
  1. Lubricate bearing bore and seal lip with gear lubricant.
  2. Install axle shaft and engage shaft into side gear. Push firmly on axle shaft to engage snap-ring.
  3. Check the differential fluid level and add fluid if necessary.
  4. Install half shaft.
  5. Install skid plate, if necessary.
scientia non olet · About LEMON Manuals