LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2005 >> Wrangler Rubicon, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 540 (Body - Interior & Exterior) >> Interior >> C-Pillar Upper Trim >> Removal

C-Pillar Upper Trim: Removal

WARNING: This page is about a different car, the 2005 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the bolts that secure the rear passenger seat cushion to the floor, (Refer to BODY/SEATS/SEAT CUSHION - REMOVAL) .
  2. Position the rear passenger seat cushion to gain access to the bolt that secures the rear outboard seat belt lower anchor and the rear seat back bracket to the rear floor panel.
  3. Loosen the bolt that secures the rear outboard seat belt lower anchor and the rear seat back bracket to the rear floor panel.
  4. Disengage the lower anchor from the loosened bolt.
  5. Using a trim stick C-4755 or equivalent, disengage the retaining tabs that secure the upper C-pillar trim panel to the retaining clips in the C-pillar.
  6. Remove the seat belt from the upper C-pillar trim panel through the slot provided and remove the upper C-pillar trim panel.
scientia non olet · About LEMON Manuals