Release-Hood Latch: Removal

WARNING: This page is about a different car, the 2005 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Hood Latch Release Cable

Courtesy of DAIMLERCHRYSLER CORP.

Remove the hood latch (Refer to BODY/HOOD/LATCH - REMOVAL) .
Remove release cable (2) from the three hood release cable retainers (1).

Fig 2: Identifying Hood Release Handle
Courtesy of DAIMLERCHRYSLER CORP.
From inside the vehicle, remove the two bolts (2) that secure the hood release handle (1) to the cowl trim panel.
Remove the grommet from the cowl panel and remove the hood release cable and handle assembly (1).