Door - Front: Door: Removal
WARNING: This page is about a different car, the 2005 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect and isolate the negative battery cable.
- Disconnect the front door wire harness connector from the body wire harness.
- Using a grease pencil or equivalent, mark the location of the front door hinges (1 and 2) on the A-pillar.
- Support the front door with a suitable lifting device and remove the four bolts (3) that secure the front door hinges to the A-pillar.
- Carefully remove the door from the body.
- If required, remove the front door hinges from the door (Refer to BODY/DOOR - FRONT/HINGE - REMOVAL) .