LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2005 >> Wrangler Rubicon, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 539 (Fuel System) >> Fuel Injection >> Sensor-Throttle Position >> Removal >> 4.7L V-8

4.7L V-8

WARNING: This page is about a different car, the 2005 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Locating Throttle Position Sensor - 4.7L V-8
GC0003789Courtesy of DAIMLERCHRYSLER CORP.
1 - THROTTLE BODY
2 - TPS
3 - IAC MOTOR
4 - IAT SENSOR (THREADED TYPE)
5 - MOUNTING SCREWS

The TPS is located on the throttle body (2).

  1. Remove air duct and tube at throttle body.
  2. Disconnect TPS electrical connector.
  3. Remove two TPS mounting bolts (screws) (5).
  4. Remove TPS from throttle body.