LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2005 >> Wrangler Rubicon, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 539 (Fuel System) >> Fuel Injection >> Sensor-Throttle Position >> Removal >> 3.7L V6

3.7L V6

WARNING: This page is about a different car, the 2005 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Locating Throttle Position Sensor - 3.7L V-6
GC0006577Courtesy of DAIMLERCHRYSLER CORP.

The Throttle Position Sensor (TPS) is mounted to the throttle body (1).

  1. Remove air resonator tube at throttle body.
  2. Disconnect TPS electrical connector.
  3. Remove two TPS mounting screws (2).
  4. Remove TPS.