LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2005 >> Wrangler Rubicon, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 539 (Fuel System) >> Fuel Injection >> Sensor-Intake Air Temperature >> Installation >> 4.7L V-8

4.7L V-8

WARNING: This page is about a different car, the 2005 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
  1. Check condition of sensor o-ring.
  2. Clean sensor mounting hole in intake manifold.
  3. Position sensor into intake manifold and rotate clockwise until past release tab.
  4. Install electrical connector.
scientia non olet · About LEMON Manuals