4.7L V-8

WARNING: This page is about a different car, the 2005 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Removal Of Idle Air Control Motor - 4.7L V-8

Courtesy of DAIMLERCHRYSLER CORP.

1 - THROTTLE BODY

2 - TPS

3 - IAC MOTOR

4 - IAT SENSOR (THREADED TYPE)

5 - MOUNTING SCREWS

The Idle Air Control (IAC) motor (3) is located on the side of the throttle body.

Remove air resonator box at throttle body.
Disconnect electrical connector from IAC motor.
Remove two mounting bolts (screws).
Remove IAC motor from throttle body.