LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2005 >> Wrangler Rubicon, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 539 (Fuel System) >> Fuel Injection >> Motor-Idle Air Control >> Removal >> 3.7L V-6

3.7L V-6

WARNING: This page is about a different car, the 2005 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Removal Of Idle Air Control Motor - 3.7L V-6
GC0006577Courtesy of DAIMLERCHRYSLER CORP.

The Idle Air Control (IAC) motor (3) is located on the side of the throttle body.

  1. Remove air resonator box at throttle body.
  2. Disconnect electrical connector from IAC motor.
  3. Remove two mounting bolts (screws).
  4. Remove IAC motor from throttle body.