Line From Cooler To Reservoir

WARNING: This page is about a different car, the 2005 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Grille Push Pins

Courtesy of DAIMLERCHRYSLER CORP.

Drain the power steering fluid out of the reservoir.
Remove the hood weather-strip seal (2) at the radiator cowl.
Remove the 6 grille push pins (1).

Fig 2: Cooler Quick Disconnect
Courtesy of DAIMLERCHRYSLER CORP.
Install tool 8875-A (2) to remove the quick connect line (3) from the fluid cooler (1).

Fig 3: Fluid Reservoir
Courtesy of DAIMLERCHRYSLER CORP.
Unseat the reservoir (1) by lifting up, Remove the fluid cooler hose (3) to the reservoir (1).
Remove the fluid cooler line from the vehicle.