Pressure Hose - Gear To Pump
WARNING: This page is about a different car, the 2005 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
| 1 - PUMP ASSEMBLY |
| 2 - PRESSURE HOSE PUMP TO GEAR |
| 3 - RETURN HOSE - RESERVOIR TO FLUID COOLER |
| 4 - FLUID COOLER |
| 5 - RETURN HOSE - STEERING GEAR TO FLUID COOLER |
| 6 - MOUNTING BRACKETS |
| 7 - STEERING GEAR |
- Siphon the power steering fluid from the reservoir.
- Disconnect the pressure line (2) at the pump (1).
- Disconnect the pressure line (2) at the gear (7).
- Remove the three mounting brackets (6) for the pressure line at the engine cradle.
- Remove the pressure line (2) from the vehicle.