LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2005 >> Wrangler Rubicon, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 538 (Rack & Pinion Power Steering System) >> Column - Service Information >> Steering Wheel >> Removal

Steering Wheel: Removal

WARNING: This page is about a different car, the 2005 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Steering Wheel
GC0027279Courtesy of DAIMLERCHRYSLER CORP.
  1. Disable and remove the drivers side airbag (1). (Refer to ELECTRICAL/RESTRAINTS/DRIVER AIRBAG - REMOVAL) .
  2. Disconnect all the electrical connectors (2,6&7).
    Fig 2: Steering Wheel Removal
    GC0027280Courtesy of DAIMLERCHRYSLER CORP.
  3. Partially remove the steering wheel bolt and leave the bolt in the column.
  4. Install puller (2) or equivalent using the top of the bolt to push on.
    NOTE: Ensure the bolts are threaded firmly into the steering wheel.
  5. Remove the steering wheel.