Steering Wheel: Installation

WARNING: This page is about a different car, the 2005 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Steering Wheel

Courtesy of DAIMLERCHRYSLER CORP.

Install steering wheel (5) to the column
NOTE: Do not reuse the old steering wheel bolt (3) (a new bolt must be used)

NOTE: Be certain that the steering wheel mounting bolt is tightened to the proper torque specification to ensure proper clockspring operation.
Install the new steering wheel bolt (3). Tighten the bolt to 54 N.m (40 ft. lbs.).
Reconnect all the electrical connectors (2, 6&7).
Install the drivers side air bag (1). (Refer to ELECTRICAL/RESTRAINTS/DRIVER AIRBAG - INSTALLATION) .