Front Transponder
WARNING: This page is about a different car, the 2005 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
Courtesy of DAIMLERCHRYSLER CORP.
| 1 - FENDER |
| 2 - INNER FENDER WELL |
- Raise and support the vehicle.
- Remove the wheel well housing cover (2).
Courtesy of DAIMLERCHRYSLER CORP.
| 1 - SCREW |
| 2 - TRANSPONDER |
| 3 - ELECTRICAL CONNECTOR |
- Remove the mounting screw (1) for the transponder (2).
- Disconnect the electrical connector (3) and remove the transponder (2) from the vehicle.