Sensor-Rear Wheel Speed: Removal

WARNING: This page is about a different car, the 2005 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Speed Sensor

Courtesy of DAIMLERCHRYSLER CORP.

1 - AXLE FLANGE

2 - WHEEL SPEED SENSOR

Raise and support the vehicle.

Remove the wheel speed sensor mounting bolt (2) from the rear support plate (1).

Fig 2: Wheel Speed Sensor- Rear

Courtesy of DAIMLERCHRYSLER CORP.

1 - CALIPER

2 - CALIPER ADAPTER

3 - WHEEL SPEED SENSOR

4 - PARK BRAKE CABLE

5 - CALIPER SLIDE BOLTS

Remove the wheel speed sensor (3) the support plate.
Disconnect the wheel speed sensor electrical connector (3).