Power Brake Booster With Esp
WARNING: This page is about a different car, the 2005 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
| 1 - POWER BRAKE BOOSTER |
| 2 - FLUID RESERVOIR |
| 3 - FLUID LEVEL SENSOR ELECTRICAL CONNECTOR |
| 4 - PRESSURE SWITCH ELECTRICAL CONNECTOR |
| 5 - PRESSURE SWITCH |
| 6 - ELECTRICAL SOLENOID CONNECTOR |
| 7 - SOLENOID CONNECTOR |
| 8 - CHECK VALVE |
| 9 - FLUID LEVEL SENSOR |
The booster assembly consists of a housing divided into separate chambers by two internal diaphragms. The outer edge of each diaphragm is attached to the booster housing (1).
Two push rods are used in the booster. The primary push rod connects the booster to the brake pedal. The secondary push rod connects the booster to the master cylinder to stroke the cylinder pistons.
Power brake boosters with ESP will have a travel sensor (7).